Purple Rain 3.0 - Gel Based Fallout Remover
Purple Rain version 3 is a new intensive pH balanced (pH 6-7) iron-contaminate remover that removes contaminants upon contact. The rapid, reactive new formula gel when applied clings to the surface and rapidly breaks down industrial fallout, rail dust, iron contaminates (ferrous iron metal parts), airborne chemical compounds and other forms of contamination. The iron contaminates begin to embed themselves into the surface under high temperatures and potentially can cause long term damage, Purple Rain 3 Gel will react and dissolve these contaminates instantly.
Purple Rain 3 is suitable for all exterior paintwork including glass, aluminium alloy wheels (not bare aluminium), clear coated alloy wheels, stainless steel, plastic panels, exhausts tips and even rubber surfaces, in fact where iron contaminates lie, Purple Rain 3 will dissolve them and remove them when pressure rinsed. Purple Rain 3 also contains cleaners and degreasers to help cut through dirt and grime, the thick gel liquid creates a unique high foam formula that sticks to the surface & penetrating into the dirt/grime and removing easily under a pressure rinse. Purple Rain 3 is the perfect all round cleaner & contaminate remover.
Purple Rain 3 is a off pink colour thick gel that sprays onto the surface. As the product is thick we have now added our heavy duty (BriteGel) trigger with all 500ml and 1 litre sizes. This trigger is perfect for thicker liquids and you can change the angle of the spray, it sprays from a jet to a fine mist covering the surface and potentially using less product than standard triggers.
When Purple Rain 3 hits the surface it begins to work into the dirt/grime and fallout instantly and the gel formula begins to turn to purple/red. As Purple Rain 3 is a gel like product it will stick to the surface and give maximum penetration for longer. On some occasions where more cleaning is necessary, Purple Rain 3 can be agitated with our DBS brush set to remove the most stubborn of contamination.
PRODUCT INFO:
Product Features:
-
New GEL based formula to ensure better coverage
-
Gel allows product to dwell longer and enables use of a brush to work product
-
Rapid reaction time to contaminants
-
Ideal for wheels and bodywork
-
New sweet fragrance added
-
How To Use:
Purple Rain 3 is easy to use and ideal in the vital decontamination process. It works so well with our Just The Tonic and our cleaner clay to remove all unwanted contamination.
Purple Rain sets to work as soon as its applied to the surface, pulling the contamination off in a purple/red colour streak.
Clean your wheels thoroughly with one of our AD wheel cleaners along with the DBS brush set and the EZ wheel brush. When your wheels are clean and free from dirt and dry, apply Purple Rain 3 liberally to the surface, make sure the surface is cool before application. When Purple Rain 3 is applied on the surface the product starts to react with the contaminants immediately, This procedure will last approx 3-4 minutes (do not let the product completely dry out), then the purple/red colour will start to fade, at this point its time to remove the excess residue from the surface by rinsing or you can agitate the surface with our DBS brush set and EZ brush to remove stubborn contamination from alloy wheels or a standard microfibre towel from the paintwork. Thoroughly pressure rinse the entire surface when the clean is completed.Important Information:
Do not let the product dry out on the surface to be treated, staining my occur
Do not use in extreme temperatures, apply in cooler conditions and to a cool wheel
If in doubt always test on an inconspicuous area