Full Custom OCDP Detail

You want the best for your pride and joy then why not treat your car with our OCDP (Outstanding Correction Detailing & Protection)  Package. This package is designed to correct heavy swirling, paint defects and maximise the visual appearance of the car and is recommended for neglected vehicles of all ages or heavily defected paintwork. In this process we are removing a very small percentage of the vehicles clear coat or upper layer to reveal a fresh new layer of clear coat beneath to achieve the defect free finish.

In this package we aim to achieve between 95-99 % of defects removal but in some cases depending on the car and paint thickness these may be limiting factors. This Detail is a lot slower process and can take time to remove the deeper marks and swirl marks, extensive machine techniques are used to achieve the highest 'Detailed' finish.

Once the correction and refinement stages have been completed the next stage will be protection where we can offer wax, acrylic or SI02 based sealants to give you the best gloss finish and protection for your car. The options will be discussed with the customer prior to booking to select the best product for the car and colour and of course to suit your needs. We want the best possible finish for your car and will work with you through this process. If you want 'breathtaking' results and also want the car better than showroom condition then this is a package your car needs.



  • All wheels cleaned with a Non Acid wheel cleaner Britegel to remove baked on brake dust and remove contamination spots.

  • Just The Tonic Tar Remover will be applied to all wheels to remove all baked on Tar deposits.

  • Wheels and lower body panels treated with Purple Rain fallout remover to remove embedded bonded contaminants.

  • Power Rinse to remove all dirt and grime

  • Wheel arches, lower sills, door shuts/boot apertures and engine bay will be pre-sprayed with our gentle Citrus wash degreaser to remove dirt and grime.

  • Engine and engine bay cleaned if required and if safe to do so - we will advise on request.

  • Power Rinse to remove the dirt.

  • Pre-Wash Snow Foam bath applied to the car with a safe pre-wash snow foaming agent PH Neutral Magifoam via Autobrite’s HD Foam lance for best results. Magifoam will encapsulate the dirt particles and safely remove them.

  • Power Rinse to remove the foam covering.

  • Safe 2 bucket and grate washing system used with a quality PH Neutral foaming shampoo Purple Velvet  and a luxury Lambswool wash mitt for safe and effective cleaning.

  • Power Rinse to remove the foam wash.

  • Decontaminate all surfaces to remove bonded contamination from paintwork with a Mild Clay Bar with Berry Blast Lube to remove embedded contaminants.

  • Power Rinse

  • Hand dried using a combination of warm filtered air and our 'Deep Pile' Microfibre drying towel ‘The Reaper'/ ‘The Hustler’ to ensure a safe. scratch less dry finish.

  • Paintwork checked under interior lighting for optimum cleaning and polishing.

  • A paint depth gauge will be used to check paint readings and will be monitored through the cutting process.

  • The car will be masked up using our detailing masking tape.

  • Stage One & Stage Two of the cutting process is carried out to remove swirl marks, paint defects, marring and fine scratches from the paint surface leaving a clean and gloss finish ready for stage 2 refinement. There will be extensive polishing cutting stages carried out to remove the heaviest of swirling and defects.

  • Stage Three - the refinement process is carried out ensuring a crisp, clean and corrected gloss finish ready for sealing.

  • Depending on choice of protection (as discussed with the client) protection will be applied to the car and removed after curing time.

  • A thorough coating of our Supersonic Si02 or Blendz Carnauba Wax to add additional gloss and protection to the paintwork.

  • A final coat of luxurious Elegance is applied to add that extra gloss and protection and great finish to the car.

  • Blendz superior wheel Sealant is applied to all wheel faces to give gloss and protection to help limit dirt and brake dust build up.

  • Exterior windows and mirrors cleaned and polished with Pain to give clarity and clear vision.

  • All glass surfaces sealed with Repel glass protection system to give optimum visibility.

  • All tyre surfaces treated with Tyre Gloss to give a desired high gloss or satin protected finish.

  • All wheel arches are dressed with SuperSheen dressing to give that new look.

  • All exterior trim surfaces conditioned and protected/dressed with Abyss.

  • All chrome, brite work and stainless steel surfaces cleaned and polished with Metal Worx.

  • Complimentary air freshener is added to finish .

  • Complimentary paper floor matt added.

From- £550